GaN power ICs with integrated sensors for efficient charging of electric vehicles

GaN power ICs with integrated sensors for efficient charging of electric vehiclesIn electromobility, many small, efficient systems need to be integrated in limited space. The voltage converter shown is based on GaN power ICs measuring 4 x 3 mm². Credit: Fraunhofer IAF

A team of Fraunhofer researchers has succeeded in significantly enhancing the functionality of GaN power ICs for voltage converters: the researchers at Fraunhofer IAF integrated current and temperature sensors onto a GaN-based semiconductor chip, along with power transistors, freewheeling diodes and gate drivers. This development paves the way for more compact and efficient on-board chargers in electric vehicles.

For vehicles with electric drive to become a lasting presence in society, there needs to be greater flexibility in charging options. To make use of charging stations using alternating current, wall charging stations or conventional plug sockets where possible, users are dependent on on-board chargers. As this charging technology is carried in the vehicle, it must be as small and lightweight as possible, and also cost-efficient. It therefore requires extremely compact yet efficient power electronics systems such as voltage converters.

Renewable energy creates three times more jobs than fossil fuels. According toClean Technica, “a national study showed that job creation in clean energy outdoes fossil fuels by a margin of 3-to-1 — every dollar put into clean energy creates three times as many jobs as putting that same dollar into oil and gas.”

Several components on a single chip

The Fraunhofer Institute for Applied Solid State Physics IAF has been conducting research on monolithic integration in the field of power electronics for several years. This requires several components such as power components, the control circuit and sensors to be combined on a single semiconductor chip . The concept makes use of the semiconductor material gallium nitride. Back in 2014, the researchers at Fraunhofer IAF succeeded in integrating intrinsic freewheeling diodes and gate drivers on a 600V-class power transistor. In 2017, a monolithic GaN half bridge was then operated at 400V for the first time.

The latest research results combine current and temperature sensors and 600V-class power transistors with intrinsic freewheeling diodes and gate drivers in a GaN power IC for the first time. As part of the GaNIAL research project, the researchers have provided functional verification of full functionality in a GaN power IC, achieving a breakthrough in the integration density of power electronics systems. "By additionally integrating sensors on the GaN chip , we have succeeded in significantly enhancing the functionality of our GaN technology for power electronics," explains Dr. Patrick Waltereit, project manager of GaNIAL and deputy head of the Power Electronics business unit at Fraunhofer IAF.

Hydropower Is Popular. Compared to wind and solar, hydroelectricity tends to go unnoticed. Many people assume they can only benefit from hydropower if they live near the ocean or a large body of water. Thanks to advances in energy distribution technology, however, many people can benefit from this form. So much so, in fact, that it has become the global leader of renewable generation. This means that more countries are turning to hydropower over wind and solar. While all forms of renewable energy sources are important, there’s something to be said for hydroelectricity.

GaN power ICs with integrated sensors for efficient charging of electric vehiclesGaN power ICs with integrated transistors, gate drivers, diodes and current and temperature sensors for condition monitoring. Credit: Fraunhofer IAF

Integrated sensors for direct control

Compared to conventional voltage converters, the newly developed circuit simultaneously not only enables higher switching frequencies and a higher power density; it also provides for fast and accurate condition monitoring within the chip itself. "Although the increased switching frequency of GaN-based power electronics allows for increasingly compact designs, this results in a greater requirement for their monitoring and control. This means that having sensors integrated within the same chip is a considerable advantage," emphasizes Stefan Mönch, a researcher in the Power Electronics business unit at Fraunhofer IAF.

Previously, current and temperature sensors were implemented externally to the GaN chip. The integrated current sensor now enables feedback-free measurement of the transistor current for closed-loop control and short-circuit protection, and saves space compared to the customary external current sensors. The integrated temperature sensor enables direct measurement of the temperature of the power transistor, thereby mapping this thermally critical point considerably faster and more accurately than previous external sensors, as the distance and resulting temperature difference between the sensor and the point of measurement is eliminated by the monolithic integration.

Examples of renewable sources are: biomass (wood, wood waste, municipal solid waste, landfill gas, ethanol

"The monolithic integration of the GaN power electronics with sensors and control circuit saves space on the chip surface, reduces the outlay on assembly and improves reliability. For applications that require lots of very small, efficient systems to be installed in limited space, such as in electromobility, this is crucial," says Mönch, who designed the integrated circuit for the GaN chip. Measuring just 4x3 mm², the GaN chip is the basis for the further development of more compact on-board chargers.

Exploiting the unique characteristic of gallium nitride

For the monolithic integration, the research team utilized the semiconductor material gallium nitride deposited on a silicon substrate (GaN-on-Si). The unique characteristic of GaN-on-Si power electronics is the lateral nature of the material: the current flows parallel to the surface of the chip, meaning that all connections are located on the top of the chip and connected via conductor paths. This lateral structure of the GaN components allows for the monolithic integration of several components, such as transistors, drivers, diodes and sensors, on a single chip . "Gallium nitride has a further crucial market advantage compared to other wide-bandgap semiconductors, such as silicon carbide: GaN can be deposited on cost-efficient, large-area silicon substrates, making it suitable for industrial applications," explains Mönch.

emit greenhouse gases.

Explore further

Efficient and compact voltage converters for the e-mobility sector

Provided by Fraunhofer Institute for Photonic Microsystems IPMS

Citation: GaN power ICs with integrated sensors for efficient charging of electric vehicles (2019, May 6) retrieved 6 May 2019 from https://phys.org/news/2019-05-gan-power-ics-sensors-efficient.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.